Universal Performance

Contractor Saw


All-purpose versatility, reliability and safety for a variety of users.

Is the Contractor Saw Right for You?

Compare Saws

Get All of the Tech

Request a Brochure
Click and drag to rotate




30" Rip Capacity: CNS175-SFA30: 30" Aluminum Extrusion Fence
36" Rip Capacity: CNS175-TGP236: 36” T-Glide Fence Assembly
52" Rip Capacity 52” T-Glide Fence Assembly
Motor Option(s) (60Hz TEFC): 1.75 HP available
Overall saw dimensions 30 in: 58 1/2" W x 40" D x 34 3/4" H
Overall saw dimensions 36 in: 69 1/8" W x 45" D x 34 3/4" H
Overall saw dimensions 52 in: 85 1/4" W x 45" D x 34 3/4" H
Motor Configuration(s): CNS175: 1.75 HP, 120v, 14 A (user config. to 220v w/optional kit available for purchase).
Saw body footprint: 25 3/4" W x 27" D (w/stand installed)
Cast iron table: 20″ W x 27″ D
Cast iron table (w/ extension wings): 44″ W x 27″ D
Extension wings: 12″ W x 27″ D Stamped Steel (optional cast iron for purchase)
Extension table 30 in: N/A
Extension table 36 in: 23 3/4″ W x 27″ D
Extension table 52 in: 40 1/8″ W x 27″ D
Shipping weights - w/ 30 in fence systems: 268 lbs (2 boxes)
Shipping weights - w/ 36 in fence systems: 350 lbs (4 boxes)
Shipping weights - w/ 52 in fence systems: 373 lbs (4 boxes)
Shipping dimensions (saw body only): 35" W x 30" D x 20" H
Shipping weight (approx.): 240 lbs (table saw only)
Assembled weights - w/ 30 in fence systems: 245 lbs
Assembled weights - w/ 36 in fence systems: 310 lbs
Assembled weights - w/ 52 in fence systems: 335 lbs
Weights - table saw only: 225 lbs
Weights - (optional cast iron wings): 35 lbs each
Blade: 40-tooth, prof. grade, 5/8″ arbor
Blade diameter: 10"
Blade tilt: Left
Blade kerf: 0.118″ (3mm)
Blade plate thickness: 0.078″ (2mm)
Max. depth of cut, blade at 0º: 3 1/8″
Max. depth of cut, blade at 45º: 2 1/4″
Max. rip, left of blade (w/30” Std. Fence): 16 1/2"
Max. rip, left of blade (w/36” or 52” T-Glide Fence): 12 1/2"
Max. rip, right of blade (w/30” Std. Fence): 30 1/2" (w/Contractor Fence Assembly)
Max. rip, right of blade (w/36” Fence): 36 1/2" (w/optional 36" rails)
Max. rip, right of blade (w/52” Fence): 52 1/2" (w/optional 52" rails)
Dado diameter: 8" (requires dado brake cartridge & insert)
Dado max. width: 13/16"
Arbor diameter at blade: 5/8"
Main bearing size: 62mm OD x 30mm ID
Second bearing size: 52mm OD x 25mm ID
Table in front of blade (max. elevation): 10 5/8"
Table behind blade (max. elevation): 7 1/8
Arbor Runout: 0.001″ Maximum allowable runout
Table flatness measured diagonally: 0.016″ Maximum gap
Blade alignment with miter slot: 0.010″ Maximum displacement
Deviation of miter gauge indexing stops from actual: ±0.25º
Alignment between splitter and blade: 0.010″ Maximum difference
Miter slots T-shaped: 3/4″ at top, 1″ at bottom, 3/8″ deep
Miter slots center: 11 1/8″ center-to-center
Miter slots info: 5 1/2″ (arbor flange to center of right slot)
Dust collection port diameter: 4"
Riving knife / splitter thickness: 0.090" (2.3 mm)
Blade guard: Standard polycarbonate, extends 1″ right of blade (opt dust guard for purchase)
Insert: zero clearance, phenolic core, melamine surfaces
Hand wheels: 6″ diameter, cast alum. w/ ABS handle
Belts: V-ribbed belt – static dissipative

Included Items

(2) Steel Extension Wings
(1) Miter Gauge
(1) Micro Blade Guard
(1) Riving Knife
(2) Blade Wrenches
(1) Push Stick
(1) 10” Blade
(1) Table Insert
(1) Standard Brake Cartridge
(1) Owner’s Manual
(1) Assembly Instructions
(2) Hardware Packs
(1) 3mm Hex Key
(1) 5mm Hex Key
(1) 8mm hex Key
(1) Blade Spacing Adjustment Gauge

Which Power and Rail Length Combo?

Choose from the pull-down menu, then pick your retailer!
(Remember, accessories must be added to your shopping cart separately.)

Thank You

Thank you for your submission


We are moving

We have outgrown our third headquarters, and are moving to a new, much larger home this week. Unfortunately, this means we will not be available via telephone or email from Noon PST on Monday, February 15th to 8am on Thursday, February 18th. We apologize for the inconvenience, and thank you for your patience and support!

Dealer Locator


Effective February 1st, USA prices on most SawStop saws and many SawStop accessories will increase.

We continue to refuse to cut corners or compromise our dedication to product quality and customer care. After holding the line on prices for over a decade, we must make an adjustment to account for more than a decade of material, shipping and other cost increases. Our last price increase on saws was in 2008!

We don't like raising our prices, and we don't plan to make it a habit.

Price increases will vary by model and accessory. Some examples, expect the Contractor Saw to increase by $100, the Professional Cabinet Saw to increase by $150, and the Industrial Cabinet Saw to increase by $150-200 (the Jobsite Saw will not increase).

Thank you for your understanding and your support. For more information on expected price increases, please contact your local SawStop dealer.

Thank you,
Your friends at SawStop