TABLE SAWS

Side by Side Comparison

Use the side by side info below to compare details about each of our table saws.

Cast-Iron Saw Line-Up

 
Overview

Contractor Saw
All-purpose versatility, reliability and safety for a variety of users.

Professional Cabinet Saw
Award-winning design engineered to meet the demands of discerning woodworkers
Compare SawStop ICS
Industrial Cabinet Saw
Maximum safety and performance for industrial and heavy duty-cycle environments.
Feature Highlights
  • Cast-iron center table, stamped steel wings upgradeable to cast-iron
  • Open base, table-mounted trunnion, exterior motor
  • MAX 1.75HP Power, 245 lbs base config weight
  • Cast-iron table and wings
  • Integrated and Industrial mobile base options
  • Cabinet base, cabinet-mounted trunnion, interior motor
  • MAX 3.0HP Power, 449 lbs typical config weight
  • Thicker, deeper cast-iron table and wings
  • Industrial mobile base option
  • Cabinet base, industrial weight cabinet-mounted trunnion, interior motor
  • MAX 7.5HP Power, 685 lbs typical config weight
30" Rip Capacity:
36" Rip Capacity:
52" Rip Capacity
Motor Option(s) (60Hz TEFC):
1.75 HP available
1.75 or 3 HP available
3, 5, 7.5 HP available
Overall saw dimensions 30 in:
58 1/2" W x 40" D x 34 3/4" H
61 3/4" W x 31 1/8" D x 34" H
Not offered
Overall saw dimensions 36 in:
69 1/8" W x 45" D x 34 3/4" H
69 1/8" W x 33" D x 34" H
69 1/4" W x 36 1/2" D x 34" H
Overall saw dimensions 52 in:
85 1/4" W x 45" D x 34 3/4" H
85 1/4" W x 33" D x 34" H
85 1/4" W x 36 1/2" D x 34" H
Motor Configuration(s):
Saw body footprint:
25 3/4" W x 27" D (w/stand installed)
19 3/8" W x 19 3/8" D (Cabinet)
20" W x 25" D (Cabinet)
Cast iron table:
20″ W x 27″ D
20" W x 27" D
24" W x 30" D
Cast iron table (w/ extension wings):
44″ W x 27″ D
44" W x 27" D
44" W x 30" D
Extension wings:
12″ W x 27″ D Stamped Steel (optional cast iron for purchase)
12" W x 27" D each
10" W x 30" D each
Extension table 30 in:
N/A
12" W x 27" D
N/A
Extension table 36 in:
23 3/4″ W x 27″ D
23 ¾” W x 27” D
24" W x 30" D
Extension table 52 in:
40 1/8″ W x 27″ D
40 1/8" W x 27" D
40" W x 30" D
Shipping weights - w/ 30 in fence systems:
268 lbs (2 boxes)
430 lbs (1.75 HP), 455 lbs (3 HP) / (2 Boxes)
N/A
Shipping weights - w/ 36 in fence systems:
350 lbs (4 boxes)
480 lbs (1.75 HP), 505 lbs (3 HP) / (4 Boxes)
755 lbs (4 boxes)
Shipping weights - w/ 52 in fence systems:
373 lbs (4 boxes)
503 lbs (1.75 HP), 528 lbs (3 HP) / (4 Boxes)
787 lbs (4 boxes)
Shipping dimensions (saw body only):
35" W x 30" D x 20" H
42”W x 31”D x 30”H
40" W x 40" D x 40" H
Shipping weight (approx.):
240 lbs (table saw only)
(table saw only) 375 lbs (1.75 HP), 400 lbs (3 HP)
640 lbs (table saw only)
Assembled weights - w/ 30 in fence systems:
245 lbs
367 lbs (1.75 HP), 380 lbs (3 HP)
N/A
Assembled weights - w/ 36 in fence systems:
310 lbs
408 lbs (1.75 HP), 426 lbs (3 HP)
635 lbs. (approx weight, actual weight varies by motor size)
Assembled weights - w/ 52 in fence systems:
335 lbs
431 lbs (1.75 HP), 449 lbs (3 HP)
685 lbs. (approx weight, actual weight varies by motor size)
Weights - table saw only:
225 lbs
317 lbs (1.75 HP), 335 lbs (3 HP)
530 lbs. (approx weight, actual weight varies by motor size)
Blade:
40-tooth, prof. grade, 5/8″ arbor
40-tooth, prof. grade, 5/8" arbor
40-tooth Titanium, 5/8" arbor
Blade diameter:
10"
10"
10"
Blade tilt:
Left
Left
Left
Blade kerf:
0.118″ (3mm)
0.118" (3mm)
0.118" (3mm)
Blade plate thickness:
0.078″ (2mm)
0.078" (2mm)
0.078" (2mm)
Max. depth of cut, blade at 0º:
3 1/8″
3 1/8"
3 1/8″
Max. depth of cut, blade at 45º:
2 1/4″
2 1/4"
2 1/4"
Max. rip, right of blade (w/30” Std. Fence):
30 1/2" (w/Contractor Fence Assembly)
Max. rip, right of blade (w/36” Fence):
36 1/2" (w/optional 36" rails)
Max. rip, right of blade (w/52” Fence):
52 1/2" (w/optional 52" rails)
Dado diameter:
8" (requires dado brake cartridge & insert)
8" (requires dado brake cartridge & insert)
8" (requires dado brake cartridge & insert)
Dado max. width:
13/16"
13/16
13/16
Arbor diameter at blade:
5/8"
5/8"
5/8"
Main bearing size:
62mm OD x 30mm ID
62mm OD x 30mm ID
62mm OD x 30mm ID
Second bearing size:
52mm OD x 25mm ID
52mm OD x 25mm ID
52mm OD x 25mm ID
Table in front of blade (max. elevation):
10 5/8"
10 1/4"
10 3/4"
Table behind blade (max. elevation):
7 1/8
7 1/2"
10"
Arbor Runout:
0.001″ Maximum allowable runout
0.001" Maximum allowable runout
0.001" Maximum allowable runout
Table flatness measured diagonally:
0.016″ Maximum gap
0.010" Maximum gap
0.010" Maximum gap
Blade alignment with miter slot:
0.010″ Maximum displacement
0.010" Maximum displacement
0.010" Maximum displacement
Deviation of miter gauge indexing stops from actual:
±0.25º
±0.25º
±0.25º
Alignment between splitter and blade:
0.010″ Maximum difference
0.010" Maximum difference
0.010" Maximum difference
Miter slots T-shaped:
3/4″ at top, 1″ at bottom, 3/8″ deep
3/4" at top, 1" at bottom, 3/8" deep
3/4" at top, 1" at bottom, 3/8" deep
Miter slots center:
11 1/8″ center-to-center
11 1/8" center-to-center
11 1/8" center-to-center
Miter slots info:
5 1/2″ (arbor flange to center of right slot)
5 1/2" (arbor flange to center of right slot)
5 1/2" (arbor flange to center of right slot)
Dust collection port diameter:
4"
4"
4"
Riving knife / splitter thickness:
0.090" (2.3 mm)
0.090" (2.3 mm)
0.090" (2.3 mm)
Blade guard:
Standard polycarbonate, extends 1″ right of blade (opt dust guard for purchase)
(dust collection) port diameter 1-1/2" Outside, 1-1/4" Inside
(dust collection) port diameter 1-1/2" Outside, 1-1/4" Inside
Insert:
zero clearance, phenolic core, melamine surfaces
zero clearance, phenolic core, melamine surfaces
zero clearance, phenolic core, melamine surfaces
Hand wheels:
6″ diameter, cast alum. w/ ABS handle
7" diameter, cast iron w/ chrome handle
8" diameter, cast iron w/ chrome handle
Belts:
V-ribbed belt – static dissipative
2 V-ribbed belts - arbor b. static dissipative
2 V-ribbed belts - arbor b. static dissipative

Thank You

Thank you for your submission

Error

We are moving

We have outgrown our third headquarters, and are moving to a new, much larger home this week. Unfortunately, this means we will not be available via telephone or email from Noon PST on Monday, February 15th to 8am on Thursday, February 18th. We apologize for the inconvenience, and thank you for your patience and support!

Dealer Locator

Notice

Effective February 1st, USA prices on most SawStop saws and many SawStop accessories will increase.

We continue to refuse to cut corners or compromise our dedication to product quality and customer care. After holding the line on prices for over a decade, we must make an adjustment to account for more than a decade of material, shipping and other cost increases. Our last price increase on saws was in 2008!

We don't like raising our prices, and we don't plan to make it a habit.

Price increases will vary by model and accessory. Some examples, expect the Contractor Saw to increase by $100, the Professional Cabinet Saw to increase by $150, and the Industrial Cabinet Saw to increase by $150-200 (the Jobsite Saw will not increase).

Thank you for your understanding and your support. For more information on expected price increases, please contact your local SawStop dealer.

Thank you,
Your friends at SawStop