TABLE SAWS

SAWSTOP JOBSITE SAW

vs. Bosch Reaxx

Build and Price Learn About The Technology
 
Overview
SawStop® Jobsite Saw
$1299


Bosch Reaxx
$1499


Stops Blade Immediately
Yes
No
User Protection if Retraction Fails
Yes
No
Test Materials for Conductivity
Yes
No
Protects Through Coastdown
Yes
No

Injury mitigation disarmed at blade speed of 240RPM or less.

Mobile Phone in Airplane Mode While Operating
NOT NEEDED
"Be sure to put your phone in airplane mode when using the saw." -Bosch video
Rotations Needed to Elevate Blade
1
25
Warning on Cartridge
NONE
“Do not expose this device to friction, impact, heat, flame, radio transmitters, electric storms and electric currents, including those caused by static electricity.”
Weight With Cart (Pounds)
108
133
(25 Pounds Heavier)
Retracts Blade
Yes
Yes
Permitted Activations
UNLIMITED
25 Before Service Required
Cartridge Cost
$79 USD / ACTIVATION
$49.50 USD / ACTIVATION
Saw Cost
$1,299 USD
$1,499 USD
Change Time
LESS THAN 90 SECONDS
See Video
60 seconds per Bosch video
Safety System Reliability
15 YEARS PROVEN

by actual saws in the field. 130,000+ Saws, Thousands of Fingers Saved.

Bosch says "proven by automotive statistical methods & tests."
U.S. Company
Yes

SawStop, LLC is a privately-held USA company, founded and headquartered in Oregon.

No

Robert Bosch Tool Corp. is a Delaware corporation owned by the German conglomerate Robert Bosch GmbH.

Zero Clearance Insert Included

(standard equipment)

Yes
No
Precision Spring-Balanced Trunnion Tilt & Elevation
Yes
No
Squeeze-to-Tilt Bevel Adjustment
Yes
No
One-Degree Bevel Detents
Yes
No
Bevel Micro Adjustment Between Degrees
Yes
No
Storage Drawer for Guard & Miter Gauge
Yes
No
Single-Bolt Blade Alignment/Adjustment
Yes
No
Requires 4-Bolt Release
Highly Efficient Dust Collection
Yes
Bosch claims a "convenient and easy access dust port."
Available Dust Collection Guard
Yes
No
Quick-Release, Low-Profile Micro Guard
Yes
No
Motor Peak HP
4.0 HP
4.0 HP
Motor Continuous HP
1.5 HP
NOT LISTED
Amps
15
15
Restart Protection
Yes
Yes
No Load RPM
4,000
3,650
Rip Capacity
25.5”
25”
Cart Assembly
Hardware: 14 pcs.
Assembly (pre-mounted): 6 steps
Hardware: 66 pcs.
Assembly: 40 steps

Practical Safety

Be sure your table saw stops on contact with skin. But don’t stop there. Make sure your saw works with all of the ways you work. The SawStop Jobsite Saw protects the operator all the way through coast-down. It features a conductivity test, so the operator never has to guess whether material will activate the system. And it makes no difference if your phone is in airplane mode. Why? Because practical safety is effective safety.

Proven Safety

In 1999, SawStop invented the ability to detect skin contact and stop the blade, helping to avoid serious injury. Since then, each SawStop table saw has been engineered and built from the ground-up for the tough stresses of woodworking and construction environments. There are no explosives in SawStop saws. The result? 130,000+ table saws, with thousands of fingers saved.

A Better Saw

We didn’t just make your table saw safer. We also made it so much better. The SawStop Jobsite Saw’s fence is smoother and more accurate. Elevate the blade in a single turn, not 25. Adjust tilt precisely with a spring-balanced trunnion. Tune the saw quickly and easily. Why use an old, tired table saw design, and pay more for it? Discover the groundbreaking innovation of the SawStop Jobsite Saw.

Our Table Saw Obsession

We don’t make windshield wipers and dishwashers. Table saws are all we do. The results of our focus? Meticulously-engineered saws built to the highest standards of performance and reliability. A track record of game-changing innovation. A reputation for customer satisfaction that is unmatched in our industry. Industrial, Professional, Contractor… now the Jobsite Saw. Discover the saw today, and experience all the ways our table saw obsession can help you get the job done.

Build and Price Learn About The Technology

Thank You

Thank you for your submission

Error

Join our Mailing List

We are moving

We have outgrown our third headquarters, and are moving to a new, much larger home this week. Unfortunately, this means we will not be available via telephone or email from Noon PST on Monday, February 15th to 8am on Thursday, February 18th. We apologize for the inconvenience, and thank you for your patience and support!

Dealer Locator

Notice

Effective February 1st, USA prices on most SawStop saws and many SawStop accessories will increase.

We continue to refuse to cut corners or compromise our dedication to product quality and customer care. After holding the line on prices for over a decade, we must make an adjustment to account for more than a decade of material, shipping and other cost increases. Our last price increase on saws was in 2008!

We don't like raising our prices, and we don't plan to make it a habit.

Price increases will vary by model and accessory. Some examples, expect the Contractor Saw to increase by $100, the Professional Cabinet Saw to increase by $150, and the Industrial Cabinet Saw to increase by $150-200 (the Jobsite Saw will not increase).

Thank you for your understanding and your support. For more information on expected price increases, please contact your local SawStop dealer.

Thank you,
Your friends at SawStop