TABLE SAWS

Model Options

.

.
.

Included With Saw
High Level Specs

See More

Which Power and Rail Length Combo?

Choose from the pull-down menu, then pick your retailer!
(Remember, accessories must be added to your shopping cart separately.)

Maximum Portability
Jobsite Saw
The promise of SawStop safety, quality and precision that can travel with you wherever you go.

SEE HOW OUR JOBSITE SAW
STACKS UP AGAINST THE REST.

vs. the Contractor Saw vs. other leading brands vs. Bosch Reaxx
Click and drag to rotate
Model Options

JSS-MCA

10" Jobsite Saw: 1.5HP (4.0HP MAX), 120VAC, 60Hz. Inc. jobsite mobile cart & fence system
15-1/2" H x 31-3/4" W x 28-3/4" D

Included With Saw
(1) Collapsible Rolling Cart
(1) Miter Gauge
(1) JSS Micro Blade Guard
(1) Riving Knife
(2) Blade Wrenches
(1) Push Stick
(1) 10” Blade
(1) Standard Brake Cartridge
(1) User’s Guide
(1) Assembly Instructions Poster
(1) Hardware Pack
(1) 3mm Hex Key
(1) 4mm Hex Key
(1) 5mm Hex Key
High Level Specs
Motor Configuration:
120 VAC 60 Hz, Universal

Amperage:
15A

Motor Peak HP
4.0 HP

Motor Continuous HP
1.5 HP

No Load RPM:
4,000

Restart Protection
Yes

Cord Length:
116 in

Saw Dimensions:
15-1/2" H x 31-3/4" W x 28-3/4" D

Saw Dim. w Cart (folded, On End):
45" H x 26-1/4" W x 28-3/4" D

Saw Dimensions w Cart (unfolded):
36" H x 48" W x 28-3/4" D

Table Dimensions (retracted):
31-1/4" W x 22-5/8" D

Weight (saw only):
79 lbs

Weight (with cart):
108 lbs

Shipping weight (with cart):
130 lbs

Blade Diameter:
10"

Dado Diameter:
8"

Dado max. width:
13/16"

Bevel Angle Range:
-1 to 46

Blade Tilt:
Left

Max. depth of cut, blade at 0º:
3-1/8"

Max. depth of cut, blade at 45º:
2-1/8"

Max. rip right of blade (extended):
25-1/2"

Max. rip left of blade:
9-3/4"

Arbor diameter at blade:
5/8"

Main bearing size:
62mm OD x 30mm ID x 16mm W

Second bearing size:
52mm OD x 25mm ID x 15mm W

Table in front of blade (max elev):
6"

Table behind blade (max elev):
7-3/8"

Miter Slots T-shaped dimensions:
.754" W x .413" D; "T" .956" W x .157" THK

Dust collection port diameter:
2-1/2" Outside, 2-1/4" Inside

Riving knife/splitter thickness:
2.3mm (.090")

Blade guard (micro guard):
Polycarbonate, extends 1" right of blade

Blade guard (dust collection) (optional):
polycarbonate, extends 1-3/16" right of blade

Blade guard (dust collection) port diameter:
1-1/2" Outside, 1-1/4" Inside

Hand wheel:
Effective diameter Ø6.3"

Belts:
Poly-V static dissipative belt

Arbor Diameter
5/8"

Blade Diameter
250mm

Blade Guard
Low Profile Blade Guard

Blade Tilt
Left

Dado Capailities
Yes

Dust Port
2-1/2"

Gross Weight
36kg (Saw only) / 49kg (with stand)

Max Cut At 45°
54mm

Max Cut At 90°
79mm

Mitre Gauge Included
Yes

Motor
Continuous 1034W - Peak 2100W

Riving Knife Style
Quick Release

Speed
4000 RPM

Stand Included or Integral
Folding, with legs

Table Size
794mm (w) x 575mm (d) (retracted)

Workshop Footprint
666mm (w) x 730mm (d) x 1143mm (h) folded

Anti Kickback Pawls?
Yes

Fence Style
T-Style Fence with Ergolock

Maximum Rip Capacity
648mm

Shipping Weight
50kg

Warranty Period
1 Year

See More

Which Power and Rail Length Combo?

Choose from the pull-down menu, then pick your retailer!
(Remember, accessories must be added to your shopping cart separately.)

Universal Performance
Contractor Saw
All-purpose versatility, reliability and safety for a variety of users.

SEE HOW OUR CONTRACTOR SAW
STACKS UP AGAINST THE REST.

vs. the Professional Cabinet Saw vs. the Jobsite Saw
Click and drag to rotate
Model Options

CNS175-SFA30

30” rip capacity & Aluminum Extrusion Fence
58 1/2" w, 40" d, 34 3/4" h

CNS175-TGP36

36” rip capacity & T-Glide Fence Assembly
69 1/8" w, 45" d, 34 3/4" h

CNS175-TGP52

52” rip capacity & T-Glide Fence Assembly
85 1/4" w, 45" d, 34 3/4" h

Included With Saw
(2) Steel Extension Wings
(1) Miter Gauge
(1) Micro Blade Guard
(1) Riving Knife
(2) Blade Wrenches
(1) Push Stick
(1) 10” Blade
(1) Standard Brake Cartridge
(1) Owner’s Manual
(1) Assembly Instructions
(2) Hardware Packs
(1) 3mm Hex Key
(1) 5mm Hex Key
(1) 8mm hex Key
(1) Blade Spacing Adjustment Gauge
High Level Specs
Motor: (all 60Hz, TEFC):
1.75 HP

Motor: (all 50Hz, 240V):
1.75 HP

Cabinet footprint:
25 3/4" w x 27" d

Cast iron table:
20″ w x 27″ d

Cast iron table (w/ extension wings):
44″ w x 27″ d (w/opt. cast iron wings)

Extension wings:
12″ w x 27″ d each

Extension table 30 in rails:
N/A

Extension table 36 in rails:
23 3/4″ w x 27″ d

Extension table 52 in rails:
40 1/8″ w x 27″ d

Weights - table saw only:
225 lbs

Weights - w/ 30 in fence systems:
245 lbs

Weights - w/ 36 in fence systems:
310 lbs

Weights - w/ 52 in fence systems:
335 lbs

Weights - (optional cast iron wings):
35 lbs each

Shipping weight (approx.):
240 lbs (table saw only)

Blade:
40-tooth, prof. grade, 5/8″ arbor

Blade diameter:
10"

Blade tilt:
Left

Blade kerf:
0.118″ (3mm)

Blade plate thickness:
0.078″ (2mm)

Max. depth of cut, blade at 0º:
3 1/8″

Max. depth of cut, blade at 45º:
2 1/4″

Max. rip, right of blade - 30 in:
30 1/2″ (w/ 30″ rails)

Max. rip, right of blade - 36 in:
36 1/2″ (w/ 36″ rails)

Max. rip, right of blade - 52 in:
52 1/2″ (w/ 52″ rails)

Max. rip, left of blade:
16 1/2″ (w/ 30" Std. Fence)

Max. rip, left of blade (options):
12 1/2" (w/ T-Glide Fence)

Dado diameter:
8″ (req. dado brake + insert)

Dado max. width:
13/16"

Arbor diameter at blade:
5/8″

Main bearing size:
62mm OD x 30mm ID

Second bearing size:
52mm OD x 25mm ID

Table in front of blade (max. elevation):
10 5/8"

Table behind blade (max. elevation):
7 1/8″

Arbor Runout:
0.001″ Maximum allowable runout

Table flatness measured diagonally:
0.016″ Maximum gap

Blade alignment with miter slot:
0.010″ Maximum displacement

Deviation of miter gauge indexing stops from actual:
±0.25º

Alignment between splitter and blade:
0.010″ Maximum difference

Miter slots T-shaped:
3/4″ at top, 1″ at bottom, 3/8″ deep

Miter slots center:
11 1/8″ center-to-center

Miter slots info:
5 1/2″ (arbor flange to center of right slot)

Dust collection port diameter:
4″ under table top

Riving knife / splitter thickness:
0.090" (2.3 mm)

Micro blade guard (standard on 1.75 HP saws):
polycarbonate, extends 1″ right of blade

Dust collection blade guard (standard on 3 HP saws)(optional on 1.75 HP saws):
polycarbonate, extends 1-3/16" right of blade

Blade guard (dust collection) port diameter:
1-1/2" Outside, 1-1/4" Inside

Insert:
zero clearance, phenolic core, melamine surfaces

Hand wheels:
6″ diameter, cast alum. w/ ABS handle

Belts:
V-ribbed belt – static dissipative

Overall saw dimensions:
44" w x 39 1/4" d x 34 3/4" h (body only)

Overall saw dimensions 30 in:
58 1/2" w x 40" d x 34 3/4" h

Overall saw dimensions 36 in:
69 1/8" w x 45" d x 34 3/4" h

Overall saw dimensions 52 in:
85 1/4" w x 45" d x 34 3/4" h

Motor configuration 1:
CNS175: 1.75 HP, 120v, 14 A

Motor configuration 2:
(user config. to 220v w/optional kit)

Motor configuration 3:
N/A

Motor configuration 4:
N/A

Motor configuration 5:
N/A

Motor configuration 6:
N/A

Motor configuration 7:
N/A

Motor configuration 8:
N/A

See More

Which Power and Rail Length Combo?

Choose from the pull-down menu, then pick your retailer!
(Remember, accessories must be added to your shopping cart separately.)

Qualified Accuracy
Professional Cabinet Saw
Superior performance for avid hobbyists and small-shop professionals.

SEE HOW OUR PROFESSIONAL CABINET SAW
STACKS UP AGAINST THE REST.

vs. the Contractor Saw vs. Cast Iron Saws
Click and drag to rotate
Model Options

PCS175 or PCS31230 -PFA30

30” rip capacity & aluminum extrusion fence
61 3/4″ w x 31 1/8″ d x 34″h

PCS175 or PCS31230 –TGP236

36” rip capacity & T-Glide Fence Assembly
69 1/8″ w x 33″ d x 34″ h

PCS175 or PCS31230 –TGP252

52” rip capacity & T-Glide Fence Assembly
85 1/4″ w x 33″ d x 34″ h

Included With Saw
(2) Cast Iron Extension Wings
(1) Miter Gauge
(1) Micro Blade Guard (1.75HP Models)
(1) Dust Collection Blade Guard (3HP Models)
(1) Riving Knife
(2) Blade Wrenches
(1) Push Stick
(1) 10” Blade
(1) Standard Brake Cartridge
(1) Owner’s Manual
(2) Hardware Packs
(1) 3mm Hex Key
(1) 5mm Hex Key
(1) 8mm Hex Key
(1) Blade Spacing Adjustment Gauge
High Level Specs
Motor: (all 60Hz, TEFC):
1.75 or 3 HP available

Motor: (all 50Hz, 230V):
3 HP

Cabinet footprint:
19 3/8″ w x 19 3/8″ d

Cast iron table:
20″ w x 27″ d

Cast iron table (w/ extension wings):
44″ w x 27″ d

Extension wings:
12″ w x 27″ d each

Extension table 30 in rails:
12" w x 27" d

Extension table 36 in rails:
23 3/4″ w x 27″ d

Extension table 52 in rails:
40 1/8″ w x 27″ d

Weights - table saw only:
317 lbs (1.75 HP), 335 lbs (3 HP)

Weights - w/ 30 in fence systems:
367 lbs (1.75 HP), 380 lbs (3 HP)

Weights - w/ 36 in fence systems:
408 lbs (1.75 HP), 426 lbs (3 HP)

Weights - w/ 52 in fence systems:
431 lbs (1.75 HP), 449 lbs (3 HP)

Weights - (optional cast iron wings):
N/A

Shipping weight (approx.):
390 lbs (table saw only)

Blade:
40-tooth, prof. grade, 5/8″ arbor

Blade diameter:
10″

Blade tilt:
Left

Blade kerf:
0.118″ (3mm)

Blade plate thickness:
0.078″ (2mm)

Max. depth of cut, blade at 0º:
3 1/8″

Max. depth of cut, blade at 45º:
2 1/4″

Max. rip, right of blade - 30 in:
30″ (w/ 30″ rails)

Max. rip, right of blade - 36 in:
36″ (w/ 36″ rails)

Max. rip, right of blade - 52 in:
52″ (w/ 52″ rails)

Max. rip, left of blade:
12"

Max. rip, left of blade (options):
N/A

Dado diameter:
8″ (requires 8R2 brake, dado insert)

Dado max. width:
13/16″

Arbor diameter at blade:
5/8″

Main bearing size:
62mm OD x 30mm ID

Second bearing size:
52mm OD x 25mm ID

Table in front of blade (max. elevation):
10 1/4″

Table behind blade (max. elevation):
7 1/2″

Arbor Runout:
0.001″ Maximum allowable runout

Table flatness measured diagonally:
0.010″ Maximum gap

Blade alignment with miter slot:
0.010″ Maximum displacement

Deviation of miter gauge indexing stops from actual:
±0.25º

Alignment between splitter and blade:
0.010″ Maximum difference

Miter slots T-shaped:
3/4″ at top, 1″ at bottom, 3/8″ deep

Miter slots center:
11 1/8″ center-to-center

Miter slots info:
5 1/2″ (arbor flange to center of right slot)

Dust collection port diameter:
4″

Riving knife / splitter thickness:
0.090" (2.3 mm)

Dust collection blade guard (standard on 3 HP saws)(optional on 1.75 HP saws):
polycarbonate, extends 1-3/16" right of blade

Blade guard (dust collection) port diameter:
1-1/2" Outside, 1-1/4" Inside

Micro blade guard (standard on 1.75 HP saws):
polycarbonate, extends 1″ right of blade

Insert:
zero clearance, phenolic core, melamine surfaces

Hand wheels:
7″ diameter, cast iron w/ chrome handle

Belts:
2 V-ribbed belts – arbor b. static dissipative

Overall saw dimensions:
44″ w x 29 3/4″ d x 34″ h

Overall saw dimensions 30 in:
61 3/4″ w x 31 1/8″ d x 34″h

Overall saw dimensions 36 in:
69 1/8″ w x 33″ d x 34″ h

Overall saw dimensions 52 in:
85 1/4″ w x 33″ d x 34″ h

Motor configuration 1:
PCS175: 1.75 HP, 120v, 14 A

Motor configuration 2:
(user config. to 220v w/optional kit)

Motor configuration 3:
PCS31230: 3 HP, 1 phase, 230v, 13 A

Motor configuration 4:
N/A

Motor configuration 5:
N/A

Motor configuration 6:
N/A

Motor configuration 7:
N/A

Motor configuration 8:
N/A

See More

Which Power and Rail Length Combo?

Choose from the pull-down menu, then pick your retailer!
(Remember, accessories must be added to your shopping cart separately.)

Heavy-Duty Precision
Industrial Cabinet Saw
Maximum safety and performance for industrial and heavy duty-cycle environments.

SEE HOW OUR INDUSTRIAL CABINET
SAW STACKS UP AGAINST THE REST.

Compare
Click and drag to rotate
Model Options

Industrial 36"

36” rip capacity & T-Glide Fence Assembly
69 1/4″ w x 36 1/2″ d x 34″ h

Industrial 52"

52” rip capacity & T-Glide Fence Assembly
85 1/4″ w x 36 1/2″ d x 34″ h

Included With Saw
(2) Cast Iron Extension Wings
(1) Miter Gauge
(1) Dust Collection Blade Guard
(1) Riving Knife
(2) Blade Wrenches
(1) Push Stick
(1) 10” Blade
(1) Standard Brake Cartridge
(1) Owner’s Manual
(2) Hardware Packs
(1) 3mm Hex Key
(1) 5mm Hex Key
(1) 8mm Hex Key
(1) Blade Spacing Adjustment Gauge
High Level Specs
Motor: (all 60Hz, TEFC):
3, 5 & 7.5 HP available

Motor: (all 50Hz):
3 & 5 HP available

Cabinet footprint:
20″ w x 25″ d

Cast iron table:
24″ w x 30″ d

Cast iron table (w/ extension wings):
44″ w x 30″ d

Extension wings:
10" w x 30" d each

Extension table 30 in rails:
N/A

Extension table 36 in rails:
24″ w x 30″ d

Extension table 52 in rails:
40″ w x 30″ d

Weights - table saw only:
530 lbs

Weights - w/ 30 in fence systems:
N/A

Weights - w/ 36 in fence systems:
635 lbs

Weights - w/ 52 in fence systems:
685 lbs

Weights - (optional cast iron wings):
N/A

Shipping weight (approx.):
640 lbs (table saw only)

Blade:
Prof. grade, 5/8″ arbor

Blade diameter:
10"

Blade tilt:
Left

Blade kerf:
0.118″ (3mm)

Blade plate thickness:
0.078″ (2mm)

Max. depth of cut, blade at 0º:
3 1/8″

Max. depth of cut, blade at 45º:
2 1/4″

Max. rip, right of blade - 30 in:
N/A

Max. rip, right of blade - 36 in:
36 1/2″ (w/ optional 36″ rails)

Max. rip, right of blade - 52 in:
52 1/2″ (w/ optional 52″ rails)

Max. rip, left of blade:
12 1/2″

Max. rip, left of blade (options):
N/A

Dado diameter:
8″ (requires a separate brake cartridge and insert)

Dado max. width:
13/16″

Arbor diameter at blade:
5/8″

Main bearing size:
62mm OD x 30mm ID

Second bearing size:
52mm OD x 25mm ID

Table in front of blade (max. elevation):
10 3/4″

Table behind blade (max. elevation):
10″

Arbor Runout:
0.001″ Maximum allowable runout

Table flatness measured diagonally:
0.010″ Maximum gap

Blade alignment with miter slot:
0.010″ Maximum displacement

Deviation of miter gauge indexing stops from actual:
±0.25º

Alignment between splitter and blade:
0.010″ Maximum difference

Miter slots T-shaped:
3/4″ at top, 1″ at bottom, 3/8″ deep

Miter slots center:
11 1/8″ center-to-center

Miter slots info:
5 1/2″ (arbor flange to center of right slot)

Dust collection port diameter:
4"

Riving knife / splitter thickness:
0.090" (2.3 mm)

Dust collection blade guard (standard on 3 HP saws)(optional on 1.75 HP saws):
polycarbonate, extends only 1-3/16" to right of blade

Blade guard (dust collection) port diameter:
1-1/2" Outside, 1-1/4" Inside

Micro blade guard (standard on 1.75 HP saws):
polycarbonate, extends 1″ right of blade

Insert:
zero clearance, phenolic core, melamine surfaces

Hand wheels:
8″ diameter, cast iron w/ chrome handle

Belts:
2 V-ribbed belts

Overall saw dimensions:
44″ w x 34″ d x 34″ h

Overall saw dimensions 30 in:
N/A

Overall saw dimensions 36 in:
69 1/4″ w x 36 1/2″ d x 34″ h

Overall saw dimensions 52 in:
85 1/4″ w x 36 1/2″ d x 34″ h

Motor configuration 1:
ICS31230: 3 HP, 1 phase, 230v, 13 A

Motor configuration 2:
ICS51230: 5 HP, 1 phase, 230v, 19.7 A

Motor configuration 3:
ICS53230: 5 HP, 3 phase, 230v, 12 A

Motor configuration 4:
ICS53480: 5 HP, 3 phase, 480v, 5.8 A

Motor configuration 5:
ICS53600: 5 HP, 3 phase, 600v, 4.8 A

Motor configuration 6:
ICS73230:7.5 HP, 3 phase, 230v, 17.8 A

Motor configuration 7:
ICS73480: 7.5 HP, 3 phase, 480v, 9 A

Motor configuration 8:
ICS73600:7.5 HP, 3 phase, 600v, 6.9 A

See More

Which Power and Rail Length Combo?

Choose from the pull-down menu, then pick your retailer!
(Remember, accessories must be added to your shopping cart separately.)

Thank You

Thank you for your submission

Error

Join our Mailing List

We are moving

We have outgrown our third headquarters, and are moving to a new, much larger home this week. Unfortunately, this means we will not be available via telephone or email from Noon PST on Monday, February 15th to 8am on Thursday, February 18th. We apologize for the inconvenience, and thank you for your patience and support!