10″ Industrial Cabinet Saw specs
| Overall saw dimensions: | 44″ w x 34″ d x 34″ h
69 1/4″ w x 36 1/2″ d x 34″ h (w/ optional fence & 36″ rails) 85 1/4″ w x 36 1/2″ d x 34″ h (w/ optional fence & 52″ rails) |
|
Motor: (all 60Hz, TEFC): |
ICS31230: 3 hp, 1 phase, 230 V, 13 A ICS51230: 5 hp, 1 phase, 230 V, 20.5 A (optional) ICS53230: 5 hp, 3 phase, 230 V, 13 A (optional) ICS53480: 5 hp, 3 phase, 480 V, 6.5 A (optional) ICS73230: 7.5 hp, 3 phase, 230 V, 17.8 A (optional) ICS73480: 7.5 hp, 3 phase, 480 V, 9 A (optional) |
| Cabinet footprint: | 20″ w x 25″ d |
| Cast iron table: | 24″ w x 30″ d, 44″ w x 30″ d (w/ extension wings) |
| Extension wing: | 10″ w x 30″ d |
| Extension table (optional): | 24″ w x 30″ d (36″ rails), 40″ w x 30″ d (52″ rails) |
| Weights (may vary with motor): |
530 lbs (table saw only)
635 lbs (with optional fence, 36″ rails & table) 685 lbs (with optional fence, 52″ rails & table) |
| Shipping weight (approx.): | 640 lbs (table saw only) |
| Blade: | 60-tooth, professional grade, 5/8″ arbor |
| Blade diameter: | 10″ |
| Blade tilt: | Left |
| Blade kerf: | 3mm |
| Blade plate thickness: | 2mm |
| Max. depth of cut, blade at 0º: | 3 1/8″ |
| Max. depth of cut, blade at 45º: | 2 1/4″ |
| Max. rip, right of blade: | 52 1/2″ (with optional 52″ rails)
36 1/2″ (with optional 36″ rails) |
| Max. rip, left of blade: | 12 1/2″ |
| Dado diameter: | 8″ (requires a separate brake cartridge) |
| Dado max. width: | 13/16″ |
| Arbor diameter at blade: | 5/8″ |
| Main bearing size: | 62mm OD x 30mm ID |
| Second bearing size: | 52mm OD x 25mm ID |
| Table in front of blade (max. elevation): | 11″ |
| Table behind blade (max. elevation): | 9 3/4″ |
| Arbor Runout: | 0.001″ Maximum allowable runout |
| Blade lateral movement over full elevation range: | 0.006″ Maximum |
| Table flatness measured diagonally: | 0.010″ Maximum gap |
| Overall table and extension wing flatness: | 0.025″ Maximum gap |
| Blade alignment with miter slot: | 0.010″ Maximum displacement |
| Deviation of miter gauge indexing stops from actual: | ±0.25º |
| Alignment between splitter and blade: | 0.010″ Maximum difference |
| Miter slots: | T-shaped, 3/4″ at top, 1″ at bottom, 3/8″ deep
11 1/8″ center-to-center 5 1/2″ (arbor flange to center of right slot) |
| Dust collection port diameter: | 4″ |
| Riving knife / splitter thickness: | 2.33mm |
| Blade guard: | polycarbonate, extends only 5/8″ to right of blade |
| Insert: | zero clearance, phenolic core, melamine surfaces |
| Hand wheels: | 8″ diameter, cast iron with chrome handle |
| Belts: | 2 V-ribbed belts |