TABLE SAWS

Qualified Accuracy
Professional Cabinet Saw
Superior performance for avid hobbyists and small-shop professionals.

SEE HOW OUR PROFESSIONAL CABINET SAW
STACKS UP AGAINST THE REST.

vs. the Contractor Saw vs. Cast Iron Saws
Click and drag to rotate
Model Options

PCS175 or PCS31230 -PFA30

30” rip capacity & aluminum extrusion fence
61 3/4″ w x 31 1/8″ d x 34″h

PCS175 or PCS31230 –TGP236

36” rip capacity & T-Glide Fence Assembly
69 1/8″ w x 33″ d x 34″ h

PCS175 or PCS31230 –TGP252

52” rip capacity & T-Glide Fence Assembly
85 1/4″ w x 33″ d x 34″ h

Included With Saw
(2) Cast Iron Extension Wings
(1) Miter Gauge
(1) Micro Blade Guard (1.75HP Models)
(1) Dust Collection Blade Guard (3HP Models)
(1) Riving Knife
(2) Blade Wrenches
(1) Push Stick
(1) 10” Blade
(1) Standard Brake Cartridge
(1) Owner’s Manual
(2) Hardware Packs
(1) 3mm Hex Key
(1) 5mm Hex Key
(1) 8mm Hex Key
(1) Blade Spacing Adjustment Gauge
High Level Specs
Motor: (all 60Hz, TEFC):
1.75 or 3 HP available

Motor: (all 50Hz, 230V):
3 HP

Cabinet footprint:
19 3/8″ w x 19 3/8″ d

Cast iron table:
20″ w x 27″ d

Cast iron table (w/ extension wings):
44″ w x 27″ d

Extension wings:
12″ w x 27″ d each

Extension table 30 in rails:
12" w x 27" d

Extension table 36 in rails:
23 3/4″ w x 27″ d

Extension table 52 in rails:
40 1/8″ w x 27″ d

Weights - table saw only:
317 lbs (1.75 HP), 335 lbs (3 HP)

Weights - w/ 30 in fence systems:
367 lbs (1.75 HP), 380 lbs (3 HP)

Weights - w/ 36 in fence systems:
408 lbs (1.75 HP), 426 lbs (3 HP)

Weights - w/ 52 in fence systems:
431 lbs (1.75 HP), 449 lbs (3 HP)

Weights - (optional cast iron wings):
N/A

Shipping weight (approx.):
390 lbs (table saw only)

Blade:
40-tooth, prof. grade, 5/8″ arbor

Blade diameter:
10″

Blade tilt:
Left

Blade kerf:
0.118″ (3mm)

Blade plate thickness:
0.078″ (2mm)

Max. depth of cut, blade at 0º:
3 1/8″

Max. depth of cut, blade at 45º:
2 1/4″

Max. rip, right of blade - 30 in:
30″ (w/ 30″ rails)

Max. rip, right of blade - 36 in:
36″ (w/ 36″ rails)

Max. rip, right of blade - 52 in:
52″ (w/ 52″ rails)

Max. rip, left of blade:
12"

Max. rip, left of blade (options):
N/A

Dado diameter:
8″ (requires 8R2 brake, dado insert)

Dado max. width:
13/16″

Arbor diameter at blade:
5/8″

Main bearing size:
62mm OD x 30mm ID

Second bearing size:
52mm OD x 25mm ID

Table in front of blade (max. elevation):
10 1/4″

Table behind blade (max. elevation):
7 1/2″

Arbor Runout:
0.001″ Maximum allowable runout

Table flatness measured diagonally:
0.010″ Maximum gap

Blade alignment with miter slot:
0.010″ Maximum displacement

Deviation of miter gauge indexing stops from actual:
±0.25º

Alignment between splitter and blade:
0.010″ Maximum difference

Miter slots T-shaped:
3/4″ at top, 1″ at bottom, 3/8″ deep

Miter slots center:
11 1/8″ center-to-center

Miter slots info:
5 1/2″ (arbor flange to center of right slot)

Dust collection port diameter:
4″

Riving knife / splitter thickness:
0.090" (2.3 mm)

Dust collection blade guard (standard on 3 HP saws)(optional on 1.75 HP saws):
polycarbonate, extends 1-3/16" right of blade

Blade guard (dust collection) port diameter:
1-1/2" Outside, 1-1/4" Inside

Micro blade guard (standard on 1.75 HP saws):
polycarbonate, extends 1″ right of blade

Insert:
zero clearance, phenolic core, melamine surfaces

Hand wheels:
7″ diameter, cast iron w/ chrome handle

Belts:
2 V-ribbed belts – arbor b. static dissipative

Overall saw dimensions:
44″ w x 29 3/4″ d x 34″ h

Overall saw dimensions 30 in:
61 3/4″ w x 31 1/8″ d x 34″h

Overall saw dimensions 36 in:
69 1/8″ w x 33″ d x 34″ h

Overall saw dimensions 52 in:
85 1/4″ w x 33″ d x 34″ h

Motor configuration 1:
PCS175: 1.75 HP, 120v, 14 A

Motor configuration 2:
(user config. to 220v w/optional kit)

Motor configuration 3:
PCS31230: 3 HP, 1 phase, 230v, 13 A

Motor configuration 4:
N/A

Motor configuration 5:
N/A

Motor configuration 6:
N/A

Motor configuration 7:
N/A

Motor configuration 8:
N/A

See More

Which Power and Rail Length Combo?

Choose from the pull-down menu, then pick your retailer!
(Remember, accessories must be added to your shopping cart separately.)

Thank You

Thank you for your submission

Error

Join our Mailing List

We are moving

We have outgrown our third headquarters, and are moving to a new, much larger home this week. Unfortunately, this means we will not be available via telephone or email from Noon PST on Monday, February 15th to 8am on Thursday, February 18th. We apologize for the inconvenience, and thank you for your patience and support!