TABLE SAWS

Heavy-Duty Precision
Industrial Cabinet Saw
Maximum safety and performance for industrial and heavy duty-cycle environments.

SEE HOW OUR INDUSTRIAL CABINET
SAW STACKS UP AGAINST THE REST.

Compare
Click and drag to rotate
Model Options

Industrial 36"

36” rip capacity & T-Glide Fence Assembly
69 1/4″ w x 36 1/2″ d x 34″ h

Industrial 52"

52” rip capacity & T-Glide Fence Assembly
85 1/4″ w x 36 1/2″ d x 34″ h

Included With Saw
(2) Cast Iron Extension Wings
(1) Miter Gauge
(1) Dust Collection Blade Guard
(1) Riving Knife
(2) Blade Wrenches
(1) Push Stick
(1) 10” Blade
(1) Standard Brake Cartridge
(1) Owner’s Manual
(2) Hardware Packs
(1) 3mm Hex Key
(1) 5mm Hex Key
(1) 8mm Hex Key
(1) Blade Spacing Adjustment Gauge
High Level Specs
Motor: (all 60Hz, TEFC):
3, 5 & 7.5 HP available

Motor: (all 50Hz):
3 & 5 HP available

Cabinet footprint:
20″ w x 25″ d

Cast iron table:
24″ w x 30″ d

Cast iron table (w/ extension wings):
44″ w x 30″ d

Extension wings:
10" w x 30" d each

Extension table 30 in rails:
N/A

Extension table 36 in rails:
24″ w x 30″ d

Extension table 52 in rails:
40″ w x 30″ d

Weights - table saw only:
530 lbs

Weights - w/ 30 in fence systems:
N/A

Weights - w/ 36 in fence systems:
635 lbs

Weights - w/ 52 in fence systems:
685 lbs

Weights - (optional cast iron wings):
N/A

Shipping weight (approx.):
640 lbs (table saw only)

Blade:
Prof. grade, 5/8″ arbor

Blade diameter:
10"

Blade tilt:
Left

Blade kerf:
0.118″ (3mm)

Blade plate thickness:
0.078″ (2mm)

Max. depth of cut, blade at 0º:
3 1/8″

Max. depth of cut, blade at 45º:
2 1/4″

Max. rip, right of blade - 30 in:
N/A

Max. rip, right of blade - 36 in:
36 1/2″ (w/ optional 36″ rails)

Max. rip, right of blade - 52 in:
52 1/2″ (w/ optional 52″ rails)

Max. rip, left of blade:
12 1/2″

Max. rip, left of blade (options):
N/A

Dado diameter:
8″ (requires a separate brake cartridge and insert)

Dado max. width:
13/16″

Arbor diameter at blade:
5/8″

Main bearing size:
62mm OD x 30mm ID

Second bearing size:
52mm OD x 25mm ID

Table in front of blade (max. elevation):
10 3/4″

Table behind blade (max. elevation):
10″

Arbor Runout:
0.001″ Maximum allowable runout

Table flatness measured diagonally:
0.010″ Maximum gap

Blade alignment with miter slot:
0.010″ Maximum displacement

Deviation of miter gauge indexing stops from actual:
±0.25º

Alignment between splitter and blade:
0.010″ Maximum difference

Miter slots T-shaped:
3/4″ at top, 1″ at bottom, 3/8″ deep

Miter slots center:
11 1/8″ center-to-center

Miter slots info:
5 1/2″ (arbor flange to center of right slot)

Dust collection port diameter:
4"

Riving knife / splitter thickness:
0.090" (2.3 mm)

Dust collection blade guard (standard on 3 HP saws)(optional on 1.75 HP saws):
polycarbonate, extends only 1-3/16" to right of blade

Blade guard (dust collection) port diameter:
1-1/2" Outside, 1-1/4" Inside

Micro blade guard (standard on 1.75 HP saws):
polycarbonate, extends 1″ right of blade

Insert:
zero clearance, phenolic core, melamine surfaces

Hand wheels:
8″ diameter, cast iron w/ chrome handle

Belts:
2 V-ribbed belts

Overall saw dimensions:
44″ w x 34″ d x 34″ h

Overall saw dimensions 30 in:
N/A

Overall saw dimensions 36 in:
69 1/4″ w x 36 1/2″ d x 34″ h

Overall saw dimensions 52 in:
85 1/4″ w x 36 1/2″ d x 34″ h

Motor configuration 1:
ICS31230: 3 HP, 1 phase, 230v, 13 A

Motor configuration 2:
ICS51230: 5 HP, 1 phase, 230v, 19.7 A

Motor configuration 3:
ICS53230: 5 HP, 3 phase, 230v, 12 A

Motor configuration 4:
ICS53480: 5 HP, 3 phase, 480v, 5.8 A

Motor configuration 5:
ICS53600: 5 HP, 3 phase, 600v, 4.8 A

Motor configuration 6:
ICS73230:7.5 HP, 3 phase, 230v, 17.8 A

Motor configuration 7:
ICS73480: 7.5 HP, 3 phase, 480v, 9 A

Motor configuration 8:
ICS73600:7.5 HP, 3 phase, 600v, 6.9 A

See More

Which Power and Rail Length Combo?

Choose from the pull-down menu, then pick your retailer!
(Remember, accessories must be added to your shopping cart separately.)

Thank You

Thank you for your submission

Error

Join our Mailing List

We are moving

We have outgrown our third headquarters, and are moving to a new, much larger home this week. Unfortunately, this means we will not be available via telephone or email from Noon PST on Monday, February 15th to 8am on Thursday, February 18th. We apologize for the inconvenience, and thank you for your patience and support!