TABLE SAWS

Universal Performance
Contractor Saw
All-purpose versatility, reliability and safety for a variety of users.

SEE HOW OUR CONTRACTOR SAW
STACKS UP AGAINST THE REST.

vs. the Professional Cabinet Saw vs. the Jobsite Saw
Click and drag to rotate
Model Options

CNS175-SFA30

30” rip capacity & Aluminum Extrusion Fence
58 1/2" w, 40" d, 34 3/4" h

CNS175-TGP36

36” rip capacity & T-Glide Fence Assembly
69 1/8" w, 45" d, 34 3/4" h

CNS175-TGP52

52” rip capacity & T-Glide Fence Assembly
85 1/4" w, 45" d, 34 3/4" h

Included With Saw
(2) Steel Extension Wings
(1) Miter Gauge
(1) Micro Blade Guard
(1) Riving Knife
(2) Blade Wrenches
(1) Push Stick
(1) 10” Blade
(1) Standard Brake Cartridge
(1) Owner’s Manual
(1) Assembly Instructions
(2) Hardware Packs
(1) 3mm Hex Key
(1) 5mm Hex Key
(1) 8mm hex Key
(1) Blade Spacing Adjustment Gauge
High Level Specs
Motor: (all 60Hz, TEFC):
1.75 HP

Motor: (all 50Hz, 240V):
1.75 HP

Cabinet footprint:
25 3/4" w x 27" d

Cast iron table:
20″ w x 27″ d

Cast iron table (w/ extension wings):
44″ w x 27″ d (w/opt. cast iron wings)

Extension wings:
12″ w x 27″ d each

Extension table 30 in rails:
N/A

Extension table 36 in rails:
23 3/4″ w x 27″ d

Extension table 52 in rails:
40 1/8″ w x 27″ d

Weights - table saw only:
225 lbs

Weights - w/ 30 in fence systems:
245 lbs

Weights - w/ 36 in fence systems:
310 lbs

Weights - w/ 52 in fence systems:
335 lbs

Weights - (optional cast iron wings):
35 lbs each

Shipping weight (approx.):
240 lbs (table saw only)

Blade:
40-tooth, prof. grade, 5/8″ arbor

Blade diameter:
10"

Blade tilt:
Left

Blade kerf:
0.118″ (3mm)

Blade plate thickness:
0.078″ (2mm)

Max. depth of cut, blade at 0º:
3 1/8″

Max. depth of cut, blade at 45º:
2 1/4″

Max. rip, right of blade - 30 in:
30 1/2″ (w/ 30″ rails)

Max. rip, right of blade - 36 in:
36 1/2″ (w/ 36″ rails)

Max. rip, right of blade - 52 in:
52 1/2″ (w/ 52″ rails)

Max. rip, left of blade:
16 1/2″ (w/ 30" Std. Fence)

Max. rip, left of blade (options):
12 1/2" (w/ T-Glide Fence)

Dado diameter:
8″ (req. dado brake + insert)

Dado max. width:
13/16"

Arbor diameter at blade:
5/8″

Main bearing size:
62mm OD x 30mm ID

Second bearing size:
52mm OD x 25mm ID

Table in front of blade (max. elevation):
10 5/8"

Table behind blade (max. elevation):
7 1/8″

Arbor Runout:
0.001″ Maximum allowable runout

Table flatness measured diagonally:
0.016″ Maximum gap

Blade alignment with miter slot:
0.010″ Maximum displacement

Deviation of miter gauge indexing stops from actual:
±0.25º

Alignment between splitter and blade:
0.010″ Maximum difference

Miter slots T-shaped:
3/4″ at top, 1″ at bottom, 3/8″ deep

Miter slots center:
11 1/8″ center-to-center

Miter slots info:
5 1/2″ (arbor flange to center of right slot)

Dust collection port diameter:
4″ under table top

Riving knife / splitter thickness:
0.090" (2.3 mm)

Micro blade guard (standard on 1.75 HP saws):
polycarbonate, extends 1″ right of blade

Dust collection blade guard (standard on 3 HP saws)(optional on 1.75 HP saws):
polycarbonate, extends 1-3/16" right of blade

Blade guard (dust collection) port diameter:
1-1/2" Outside, 1-1/4" Inside

Insert:
zero clearance, phenolic core, melamine surfaces

Hand wheels:
6″ diameter, cast alum. w/ ABS handle

Belts:
V-ribbed belt – static dissipative

Overall saw dimensions:
44" w x 39 1/4" d x 34 3/4" h (body only)

Overall saw dimensions 30 in:
58 1/2" w x 40" d x 34 3/4" h

Overall saw dimensions 36 in:
69 1/8" w x 45" d x 34 3/4" h

Overall saw dimensions 52 in:
85 1/4" w x 45" d x 34 3/4" h

Motor configuration 1:
CNS175: 1.75 HP, 120v, 14 A

Motor configuration 2:
(user config. to 220v w/optional kit)

Motor configuration 3:
N/A

Motor configuration 4:
N/A

Motor configuration 5:
N/A

Motor configuration 6:
N/A

Motor configuration 7:
N/A

Motor configuration 8:
N/A

See More

Which Power and Rail Length Combo?

Choose from the pull-down menu, then pick your retailer!
(Remember, accessories must be added to your shopping cart separately.)

Thank You

Thank you for your submission

Error

Join our Mailing List

We are moving

We have outgrown our third headquarters, and are moving to a new, much larger home this week. Unfortunately, this means we will not be available via telephone or email from Noon PST on Monday, February 15th to 8am on Thursday, February 18th. We apologize for the inconvenience, and thank you for your patience and support!