TABLE SAWS

Accessories

Select a Category

Micro Blade Guard

TSG-MG

  • Comes standard on Jobsite saws and 1.75 HP cast iron saws
  • Independent lateral slides minimize blade exposure
  • Low profile to allow for cuts as narrow as 3/4 of an inch

10” 60-Tooth Blade

CB104 184

  • High quality heat treated steel
  • Carbide tipped
  • Precision balanced
  • Expansion slots help reduce vibration, noise and heat buildup
  • ATB, 5/8” arbor, 3mm kerf, Rake angle 15°, Top angle 10°, Plate thickness 2mm, Tooth Thickness 0.079”

10” 40-Tooth Blade

CNS-07-148

  • High quality heat treated steel
  • Carbide tipped
  • Precision balanced
  • Expansion slots help reduce vibration, noise and heat buildup
  • ATB, 5/8” arbor, 3mm kerf, Rake angle 15°, Top angle 10°, Plate thickness 2mm, Tooth Thickness 0.079”

Jobsite Saw Dust Collection Blade Guard

JSS-DCG

  • Collect above-table dust
  • Independent lateral slides minimize blade exposure
  • Low profile to allow for cuts as narrow as 3/4 of an inch
  • Attaches directly to customer’s dust collection system

Jobsite Saw Dado Zero Clearance Insert

TSI-DJB

  • ​One push lockdown allows for tool-free operation
  • Positioning screws ensure a solid and precise fit in the table

Jobsite Saw Standard Zero Clearance Insert

TSI-SJB

  • ​One push lockdown allows for tool-free operation
  • Positioning screws ensure a solid and precise fit in the table
  • Pre-formed clearance slots for SawStop blade guard and riving knife

Two Cast Iron Wings

CNS-CIWA

  • For use with the Contractor Saw
  • Precision ground to .001”
  • Aligns perfectly with table, rails and extension table
  • 80 more pounds means added stability and reduced vibration

Dust Collection Panel

CNS-DCP

  • For use on the Contractor Saw without a mobile cart
  • 2.5” and 4” ports fit most dust collection systems
  • Easy-to-use clamps make redirecting the internal tube a breeze
  • Quick and easy to install

Dust Collection Blade Guard

TSG-DC

  • Comes standard on 3 HP and higher cast iron saws
  • Collect above-table dust
  • Independent lateral slides minimize blade exposure
  • Low profile to allow for cuts as narrow as 3/4 of an inch
  • Attaches directly to customer’s dust collection system
  • Compatible with SawStop Overarm Dust Collection

10” 80-Tooth Blade

BTS-P-80HATB

  • Quality engineered, long-life blade for professional and heavy-duty use
  • Precision balanced, fully tensioned and heat treated
  • Extra large teeth made of the highest-grade tungsten carbide resist dulling and can be re-sharpened multiple times
  • Titanium coating for extended wear and smoother, more accurate cuts
  • Laser cut expansion slots help prevent vibration, noise and heat buildup
  • High ATB, 5/8” arbor, 1/8” kerf, Rake angle -5°, Top Angle 40°, Plate thickness 0.094”, Tooth thickness 0.098”

10” 40- Tooth Blade

BTS-R-40ATB

  • Superior blade for cutting and ripping softwoods and hardwoods
  • Quality engineered, long-life blade for professional and heavy-duty use
  • Precision balanced, fully tensioned and heat treated
  • Extra large teeth made of the highest-grade tungsten carbide resist dulling and can be re-sharpened multiple times
  • Titanium coating for extended wear and smoother, more accurate cuts
  • Laser cut expansion slots help prevent vibration, noise and heat buildup
  • ATB, 5/8” arbor, 1/8” kerf, Rake angle 15°, Top angle 10°, Plate thickness 0.087”, Tooth thickness 0.106”

Dado Brake Cartridge

TSDC-8R2

  • Revolutionary SawStop protection
  • Compatible with all standard 8″ dado sets up to 13/16” thick
  • Compatible with all woods and other non-conductive materials

Standard Brake Cartridge

TSBC-10R2

  • Revolutionary SawStop protection
  • Compatible with all standard 10″ blades
  • Compatible with all woods and other non-conductive materials

Dado Zero Clearance Insert

TSI-DLD

  • Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface
  • Positioning screws ensure a solid and precise fit in the table
  • Positive locking latch allows for tool-free operation

Standard Zero Clearance Insert

TSI-SLD

  • Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface
  • Positioning screws ensure a solid and precise fit in the table
  • Pre-formed clearance slots for SawStop blade guard and riving knife
  • Dual metal wear plates for anti-kickback pawls
  • Positive locking latch allows for tool-free operation

Thank You

Thank you for your submission

Error

Join our Mailing List

We are moving

We have outgrown our third headquarters, and are moving to a new, much larger home this week. Unfortunately, this means we will not be available via telephone or email from Noon PST on Monday, February 15th to 8am on Thursday, February 18th. We apologize for the inconvenience, and thank you for your patience and support!